Generator GO to 2000 BC SC

Ozonizers Multifunction led commercial air and water

Ozone generator for disinfection and deodorization commercial and domestic in the required Ozone driven by a tube of small section.

Are mounted in an enclosure, stainless steel., including reactor producer of Ozone, compressor diaphragm (membrane), cartridge drying inlet air to the compressor and forced cooling by fan. The regulation system of the computer is performed by a digital timer that regulates both the production of Ozone as the injection of air from the compressor.

Application

Water: reservoirs, tanks, wells, washers, industrial, etc
Air: refrigerated rooms, ducts, sprinkler environmental, ventilation ducts, exhaust fumes, ozone treatments therapy professionals, etc

Water treatment

They are designed to disinfect and sterilize large quantities of water, both deposits, such as wells or cisterns.

Are computers with which you'll be able to get ozonated water instantly and extremely simple, inyectándola through a tube that delivers the gas to a diffuser. Introducing the Ozone into the water by compressed air, which provides a great diffusion of Ozone in the water to be treated.

If you are using a Venturi through a circuit recirculation will get a better mixture of Ozone/water.

For rafts of water outside we can calculate the need of O3 at a rate of 2 to 3 g/m3, depending on whether there is much or little time to carry out the treatment of ozonation.

In case of the need for large amounts of Ozone, you can use the computer ready for connection to a compressed air system external, something that will greatly increase the volume of air injected into the water. Through previous study, we can adjust to any need.

Water tanks

Models with a compressor allow you to install diffusers on the tank bottom and carry the Ozone through conduit to these diffusers that are responsible for the diffusion of the air ozonated in the water, creating a column of bubbles.

Another option is much more effective is to use a computer without a compressor for a recirculation system with Venturi, obtaining a correct mixture of Ozone/water. This system requires a recirculation pump, and provides greater diffusion of Ozone in the water.

Washing machines-industrial

While we recommend an ozonator in continuous, we can connect these computers to washing machines and industrial as well prescindiremos of the need for hot water and reduce the use of detergents, bleaches and fabric softeners, reaching even to remove them if the fabrics are not very dirty.

For a small washing machine will use a generator to about 2,000 mg/h for a median of about 4,000 mg/h and for a large one of about 8,000 mg/h.

Air treatment

When installing an Ozone generator in a refrigeration chamber, the combination of the high voltage with the environmental humidity deteriorates rapidly components of the machine. In addition, when we feed the generator with moist air to the get to the deterioration of much more quickly, since electricity (when the air receives the electric shock in the reactor), more H₂O, more Nitrogen (the air is composed of 78% nitrogen) is generated by nitric acid, a compound very oxidizing and destructive of the reactor itself.

The generators of O3 led are installed outside of the cold room, away from the humidity of the interior of the camera. The tube that leads to the gas is what will be inside for the injection, after the drive, in such a way that they expand rapidly throughout the chamber.

Ducts of air Conditioning / Ventilation

Install the generator as close as possible to the ventilation duct, injecting the air ozonated in the interior by means of a pipe union between the output connector of the generator and a hole to enter a small portion of the tube inside, always after the turbine driving. The generator should be operated only when the circuit work ventilation (can be fed in parallel with the fan motor via a relay/contactor to separate power supplies)

Cold rooms

Install the generator as close as possible to the camera (never inside) and injects Ozone through a hole in the panel of the camera (the highest possible) in order to make pass through 6/8 to your interior.

For cameras with large size you can install a distribution pipe in the inside and so ensure a better distribution of Ozone throughout its volume. In these cases it may be necessary to use a compressor with a higher power to achieve all the volume to be treated.

The generator there is that place you always higher than the input to the camera, so that any condensation in the inlet pipe does not back up into the generator, or in your case use a water trap for condensation.

Elimination of odors in air extraction systems

In extraction ducts of air is injected Ozone into the duct, trying to keep the maximum distance to the output so that the Ozone is able to perform its effect during all the time in the air
expelled flows through the tube output.

In these cases, the greater the length of the chimney, the greater will be the effect of oxidation of the substances generating bad odors.

Treatments of ozone therapy professionals

In hospitals, clinics and practices, the model GO-2000-BC, thanks to its compressor of 25 l /minute, it will be very suitable for the healing of ulcers, and for all kinds of treatments of ozone therapy that does not involve injection into tissues or blood.

Example of Ozone treatment on the skin

Technical characteristics